The ESP-EYE development board reference design resources, including schematics, PCB layout, gerber files, and BOM lists.

ESP-LAUNCHER, ESP-Test Board, hardware downloading resources, manufacturing specifications, BOM, schematics.

Schematics, PCB layout, Gerber and BOM files of ESP-Prog, a debug tool.

This document introduces ESP-TOUCH protocol and the relevant application.

This application note describes the recommended placement of the antenna on a host board to ensure optimal RF performance.

This document introduces the hardware specifications of ESP-WROOM-02D and ESP-WROOM-02U.

This document introduces the hardware specifications of ESP-WROOM-S2.

ESP-WROOM-S2 hardware downloading resources, manufacturing specifications, BOM, schematics.

This document introduces the ESP32 AT commands, explains how to use them and provides examples of several common AT commands.

This document introduces the ESP32 Bluetooth architecture.

This document introduces the ESP32 BT&BLE dual-mode bluetooth.

The document lists the FAQ about ESP32 and the answers.

The guidelines outline recommended design practices when developing standalone or add-on systems based on the ESP32 series of products, including ESP32 SoCs, ESP32 modules and ESP32 development boards.

The manual provides detailed and complete information on how to use the ESP32 memory and peripherals. 

The getting started guide for the ESP32-DevKitC development board.

Schematics, PCB layout, Gerber and BOM files of ESP32-DevKitC-V4.

This document introduces to users the ESP32-LyraTD-MSC development board, focusing on specifications, flashing the firmware, network configuration and interactive function.

The ESP32-MeshKit-Sense Hardware Design Guidelines introduces the block diagram, PCB layout and function modules of the development board ESP32-MeshKit-Sense.

This user guide shows how to get started with the ESP32-PICO-KIT V4 mini development board. 

Schematics, PCB layout, Gerber and BOM files of ESP32-Sense Kit, the touch sensor development kit based on ESP32.

ESP32-SOLO-1 reference design resources, including schematics, PCB layout, gerber files, and BOM list.

ESP32-WROOM-32 module reference design resources, including schematics, PCB layout, gerber files, and BOM list. This reference design is V1.0, which is used as reference by purchasers of Espressif's mass-produced modules. 

This document introduces the hardware specifications of ESP32-WROOM-32D and ESP32-WROOM-32U Datasheet.

This document introduces the specifications of ESP32-WROVER hardware, including overview, pin definitions, functional description, peripherals, and electrical characteristics, etc.  

ESP32-WROVER-B reference design resources, including schematics, PCB layout, gerber files, and BOM list.

This document explains how to upgrade ESP8266 firmware over Espressif Cloud through Wi-Fi.

This document provide ESP8266 Flash read & write introduction.

This document introduces frequency offset tuning and antenna impedance matching for ESP8266 in order to achieve optimum RF performance.

AT based on ESP8266_NONOS_SDK.

This document is the ESP8266 Non-OS SDK IoT Demo Guide.

This guide provides the parameter configuration for ESP8266 phy init bin.

This document is a quick user guide to getting started with the old version ESP8266 SDK V2.X and earlier versions.

For the new ESP8266_RTOS_SDK (ESP-IDF style) V3.0 and later versions, please see ESP8266_RTOS_SDK/docs.

This document is the API reference for ESP8266_RTOS_SDK V2.X and earlier versions.

For the new ESP8266_RTOS_SDK (ESP-IDF style) V3.0 and later versions, please see ESP8266_RTOS_SDK/docs.

This document introduces a downloading protocol for ESP8266 firmware.

This document takes ESP-LAUNCHER and ESP-WROOM-02 as examples to introduce how to use the ESP8266 SDK V2.X and earlier versions.

For the new ESP8266_RTOS_SDK (ESP-IDF style) V3.0 and later versions, please see ESP8266_RTOS_SDK/docs.

This document provides introduction to the interfaces integrated on ESP8266. Functional overview, parameter configuration, function description, application demos and other information is included.

ESP8266-DevKitC Getting Started Guide

This document introduces the specifications of ESP8266EX hardware, including overview, pin definitions, functional description, peripherals, and electrical characteristics, etc.

This document introduces the specifications of ESP8285, including pin definitions, functional description, electrical specifications, package information, etc.

This guide mainly describes the production testing schemes available for Espressif Wi-Fi products (Wi-Fi module/Chip Onboard), thus providing reference for the production testing of customer products.

This document summarizes the packing requirements of Espressif’s chip products, including the packing method, packing-material dimensions, standard packing quantity, labels, dry-packing requirements and marking conventions.

This document provides a guide to installing OpenOCD for ESP32 and debugging using GDB.

The document outlines how PROGMEM may be used to save RAM on the ESP8266EX when using the Arduino IDE.