• Download

Found 67 results
  • Collapse all
  • Expand all
Title Body Platformsort descending Version Release Date Download
ESP8266 Low Power Test Demonstration

This guide is intended to help implement and test the available low power modes and observe the resulting current consumption of the ESP8266 easily and quickly. It demonstrates the Modem-sleep mode, Light-sleep mode, and Deep-sleep mode.

ZIP V1.0 2016.09.29
TCP/UDP UART Passthrough Test Demonstration

The UART passthrough mode has been provided with the AT firmware to facilitate sending of data blocks of large size and for continuous transmission of small packets of data. In the passthrough mode, the data sent by the main application processor is directly forwarded to the target networking device via a TCP or UDP connection. Here, the ESP8266 AT firmware handles the networking tasks involved. This guide is intended to help users run TCP & UDP passthrough test on the ESP8266 IOT Platform quickly to evaluate the feature with various networking configurations of the ESP8266.

ZIP V1.0 2016.10.10
ESP-Launcher Data Send and Receive Operation Power Consumption Tests

The power consumption of the ESP8266 depends on the PHY mode employed for sending or receiving data. In power critical applications, it is important to balance the average or burst data transfer rate as well as overall power consumption of the system.This test demonstration is intended to demonstrate the results of various power consumption tests on the ESP8266. Based on this guide, users can choose the appropriate PHY mode and data transmission scheme for their application.

ZIP V1.0 2016.10.10
ESP8266 FOTA Demonstration

Espressif provides guidelines and a sample implementation of FOTA (Firmware Over-The-Air) function to upgrade the firmware on devices powered by the ESP8266. ESP8266 device will download a new version of firmware from the update server over Wi-Fi and run it. This guide is intended to help you run a FOTA demonstration on the ESP8266 easily and quickly, with a PC acting as the local update server. The FOTA test has been demonstrated and run on the ESP-Launcher, an ESP8266 evaluation board designed by Espressif. However, with appropriate build settings based on your application flash configuration, the test can be made to run on any ESP8266-based system. The demonstration initially runs the user1.bin as the primary firmware. The user1.bin, when executed, connects to the update server and downloads user2.bin (updated firmware) into the flash memory. When a system restart is triggered, the ESP8266 boots into the updated user2.bin, which now becomes the primary firmware binary file until another update is available for download. This new update is downloaded as user1.bin. This cycle is repeated for every subsequent update.

ZIP V1.0 2016.10.11
ESP8266 FOTA Demonstration with Phone App

This guide demonstrates the FOTA (Firmware-Over-The-Air) function for ESP8266-based devices. In particular, the guide outlines the process of upgrading ESP8266 firmware from Espressif Cloud over Wi-Fi by using our Android app. This process requires no technical skills and does not involve a PC or UART based tools. Therefore this process can be carried out by any user, including end users of ESP8266 based products. The FOTA test has been demonstrated and run on the ESP-Launcher, an ESP8266 evaluation board designed by Espressif. However, with appropriate build settings based on your application flash configuration, the test can be made to run on any ESP8266 based system.

ZIP V1.0 2016.10.23
ESP32&ESP8266&ESP32S2 RF Performance Test Demonstration

This guide demonstrates how to run an RF related performance test and certification test using an RF tester to check an ESP32 / ESP8266 based product, either functioning as a standalone controller or an integrated part of MCU.

ZIP V2.5 2020.07.15
Flash Download Tools
Windows PC V3.8.8 2021.06.02
ESP8266&ESP32 WFA Certification and Test Guide

This test guide document is used to guide customers based on the ESP32/ESP8266 product design process instructions required when passing the certification in the WiFi Alliance certification laboratory.

Windows PC v1.1 2020.08.05
ESP-WROOM-32 AT Bin V0.10

This is the first release of ESP32 AT firmware, which supports AT commands through UART. 

Please note that only Wi-Fi related functions are supported in this version. BLE-related functions will be supported in future release.

Bin V0.10 2017.06.14
ESP32-WROOM-32 AT Bin V2.0
Bin V2.0 2019.11.05
ESP8266 AT Bin V1.5.1


When developing new products with ESP8266, it is recommended that you use ESP8266 AT Bin V2.0.0.0 and/or later versions. Previous AT versions were based on the ESP8266 NONOS SDK, to which no new features will be added in the future. ESP8266 AT Bin V2.0.0.0 and/or later versions will be developed according to the ESP8266 RTOS SDK, which will continue being updated.

Version Description:
Based on ESP8266_NonOS_SDK V2.1.

1. Fixed the WPA2 KRACK issue.

2. Fixed the issue of wrong messages being displayed after upgrading the firmware. 

Bin V1.5.1 2017.11.06
Bin V2.0 2019.11.05

The ESP32 sends AT commands through UART1 by default, for ESP32-WROVER, it is:

* GPIO19 is RXD

* GPIO22 is TXD

* GPIO14 is RTS

* GPIO15 is CTS

Bin V0.10 2017.09.18
ESP32-SOLO AT Bin V2.0
Bin V2.0 2019.11.05
ESP-WROOM-32 AT Bin V1.0

Release note: https://github.com/espressif/esp32-at/releases

Bin V1.0.0 2017.11.17

More information on GitHub

Development projects are freely distributed under Espressif's MIT license on GitHub.