Found 8 results
Title Body Platform Version Release Datesort ascending Download
ESP8266 Qcloud IoT AT

Based on ESP8266 QCloud AT Command.

Bin V1.0.0 2019.08.19
ESP8266 IDF AT Bin V2.0

Based on ESP8266_RTOS_SDK V3.2.

Bin V2.0 2019.07.16
ESP8266 NonOS AT Bin V1.7.1

Based on ESP8266_NonOS_SDK V3.0.1.

Limited by the size of the AT bin file,  only `1024+1024 flash map` is supported by default. 

Bin V1.7.1 2019.07.15
ESP8266 AT Bin V1.7.0

Based on ESP8266_NonOS_SDK V3.0.0.

Limited by the size of the AT bin file,  only `1024+1024 flash map` is supported by default. 

Bin V1.7.0 2018.08.24
ESP8266 AT Bin V1.6.2

1. Fix station connecting behavior after upgrading from an old version.

2. Fix wrong SSID query when the length of SSID is 32 bytes.

3. Optimize AT+CIUPDATE behavior.

Bin V1.6.2 2018.06.08
ESP8266 AT Bin V1.6.1

1. Fix an issue that light sleep current is larger than before.

Bin V1.6.1 2018.02.13
ESP8266 AT Bin V1.6

1. Update AT version to;

2. Add a new command `AT+SYSMSG` to enable some report information;

3. Add a new command `AT+CWCOUNTRY`;

    - `AT+CWCOUNTRY=<country_policy>,"country_code",<start_channel>,<total_channel_number>`

4. Add new command `AT+CIPSERVERMAXCONN`;


5. Update command `AT+CWLAP`;

    - `AT+CWLAP =<ssid>[,<mac>,<ch>,<scan_type>,<scan_time_min>,<scan_time_max>]`

6. Update command `AT+CWLAPOPT`;

    - Mask changes from 0x7F to 0x7FF

7. Optimize tcp server by using new `espconn_recv`;

8. Fix an issue that getting error irom string when print messages after upgrade;

9. Fix an issue that baudrate is not correctly set when it was set at 1,200;

10. Fix an issue that it should return error if the link id is wrong;

11. Fix an issue that DNS auto mode is used by default;

12. Fix a wrong link id issue when client connection number reaches maximum;

13. Fix an issue that error will be reported when the maximun connection number is more than 5;

14. Fix the message is incorrect when creating UDP if ip is a domain name;

15. Fix GSLP too long time error;

16. Fix that `AT+CIPSTART` causes busy if the server is connected at the same time;

Bin V1.6 2018.02.07
ESP8266 AT Bin V1.5.1

Based on ESP8266_NonOS_SDK V2.1.

1. Fixed the WPA2 KRACK issue.

2. Fixed the issue of wrong messages being displayed after upgrading the firmware. 

Bin V1.5.1 2017.11.06