Found 18 results
Title Body Platformsort descending Version Release Date Download
ESP32-WROVER AT Bin V1.1

Release note is in the zip..

Bin V1.1 2018.06.13
ESP32-WROOM-32 AT Bin V1.1

Please see the release note in the ZIP file.

Bin V1.1 2018.06.13
ESP32-WROOM-32 AT Bin V1.1.1

Fixed the bug that ESP32-AT gets crushed when receiving AT commands with two "\r\n".

Please see the release note in the ZIP file for detailed information.

Bin V1.1.1 2018.07.11
ESP32-WROVER AT Bin V1.1.1

Fixed the bug that ESP32-AT gets crushed when receiving AT commands with two "\r\n".

Please see the release note in the ZIP file for detailed information.

Bin V1.1.1 2018.07.11
ESP8266 AT Bin V1.7.0

Based on ESP8266_NonOS_SDK V3.0.0.

Limited by the size of the AT bin file,  only `1024+1024 flash map` is supported by default. 

Bin V1.7.0 2018.08.24
ESP32-WROOM-32 AT Bin V1.1.2

Please see the release note in the ZIP file for detailed information.

Bin V1.1.2 2018.09.04
ESP32-WROVER AT Bin V1.1.2

Please see the release note in the ZIP file for detailed information.

Bin V1.1.2 2018.09.04
ESP32 AT Bin V1.1.3

Please see the release note in the ZIP file.

Bin V1.1.3 2018.12.26
ESP32 AT Bin V1.2

Please see the release note in the ZIP file.

Bin V1.2 2019.06.28
ESP-WROOM-32 AT Bin V0.10

This is the first release of ESP32 AT firmware, which supports AT commands through UART. 

Please note that only Wi-Fi related functions are supported in this version. BLE-related functions will be supported in future release.

Bin V0.10 2017.06.14
ESP8266 NonOS AT Bin V1.7.1

Based on ESP8266_NonOS_SDK V3.0.1.

Limited by the size of the AT bin file,  only `1024+1024 flash map` is supported by default. 

Bin V1.7.1 2019.07.15
ESP8266 AT Bin V1.5.1

Based on ESP8266_NonOS_SDK V2.1.

1. Fixed the WPA2 KRACK issue.

2. Fixed the issue of wrong messages being displayed after upgrading the firmware. 

Bin V1.5.1 2017.11.06
ESP8266 IDF AT Bin V2.0

Based on ESP8266_RTOS_SDK V3.2.

Bin V2.0 2019.07.16
ESP32-WROVER AT Bin V0.10

The ESP32 sends AT commands through UART1 by default, for ESP32-WROVER, it is:

* GPIO19 is RXD

* GPIO22 is TXD

* GPIO14 is RTS

* GPIO15 is CTS

Bin V0.10 2017.09.18
ESP-WROOM-32 AT Bin V1.0

Release note: https://github.com/espressif/esp32-at/releases

Bin V1.0.0 2017.11.17