• Development Boards

    For easy prototyping and easy interfacing choose Espressif’s development boards! Powered by our new SoCs, the all-in-one dev kits are all you need to develop your own IoT applications.

2.4 GHz Wi-Fi & BT/BLE Development Boards
2.4 GHz Wi-Fi Development Boards
2.4 GHz Wi-Fi + BT/BLE + Sensor Development Boards


2.4 GHz Wi-Fi & BT/BLE Development Boards

Features

  • PC connectivity: USB
  • Power supply options: USB (by default), or 5V/GND header pins, or 3V3/GND header pins
  • SDK: ESP-IDF source code and example applications
Boards Description Flash / PSRAM Interfaces UI Related Products Getting Started
ESP-EYE

ESP-EYE is a development board for image recognition and audio processing, which can be used in various AIoT applications. It features an ESP32 chip, a 2-Megapixel camera and a microphone. ESP-EYE offers plenty of storage, with an 8 Mbyte PSRAM and a 4 Mbyte flash. It also supports image transmission via Wi-Fi and debugging through a Micro-USB port.

4 MB Flash 8 MB PSRAM

  • I/O
  • USB
Buttons, LEDs ESP32
Getting Started
ESP32-DevKitC

ESP32-DevKitC is an entry-level development board. It has all the ESP32 pins exposed and is easy to connect and use.

4 MB Flash
  • I/O
  • USB
Buttons, LEDs ESP32-WROOM-32D
ESP32-WROOM-32U
ESP32-WROOM-32
ESP32-SOLO-1
ESP32-WROVER-B
ESP32-WROVER-IB
Getting Started
ESP32-PICO-KIT

ESP32-PICO-KIT is Espressif's smallest development board, as it fits into a mini breadboard. It is fully functional with the minimum number of discrete components, while it has all the ESP32 pins exposed.

4 MB Flash

  • I/O
  • USB
Buttons, LEDs ESP32-PICO-D4
Getting Started
ESP32-LyraT

The ESP32-LyraT development board is designed for the speech and voice recognition market. It integrates the ESP32-WROVER module, which includes a dual-core processor and 4.5 MB of operating memory. With this development board, only few peripheral devices are required for implementing a highly-integrated audio solution.

4 MB Flash+4 MB PSRAM
  • Micro SD Card
  • Audio Output
  • USB
  • Speaker
Touch Buttons, Keys, LEDs ESP32-WROVER
Getting Started
ESP32-LyraTD-DSPG


ESP32-LyraTD-DSPG  is based on ESP32-WROVER-B, a BT/Wi-Fi combo module, and a digital signal processor (DSP) that features a three-microphone array for noise reduction, echo cancellation, beamforming and wake-word detection. ESP32-LyraTD-DSPG is integrated with peripheral devices and consists of two development boards. The sub board mainly consists of the microphone array, function keys and LEDs. The main board is integrated with power management, Wi-Fi and audio modules like dsp, codec and power amplifier. The two boards can be connected with FPC.

16 MB Flash+ 8 MB PSRAM

USB

FPC

Speaker

Phone Jack

Button, Microphone, LED ESP32-WROVER-B
Getting Started
ESP32-LyraTD-MSC

ESP32-LyraTD-MSC, one of Espressif’s Audio Development Boards, is an Acoustic Echo Cancelation (AEC) solution supporting voice recognition, near-field and far-field voice wake-up. Audio files in the format of AAC, FLAC, OPUS and OGG can be decoded and output without quality loss. It also supports connection to Baidu's DuerOS and Amazon's Alexa Voice Service (AVS).

4 MB Flash+4 MB PSRAM

USB

I²S

SPI

Earphone jack

Speaker

Micro SD Card

JTAG

Programing

LEDs, Keys ESP32-WROVER
Getting Started
ESP-WROVER-KIT-VB

The ESP-WROVER-KIT-VB is a variant of ESP-WROVER-KIT that comes with an ESP32-WROVER-B module by default. This board features support for an LCD and MicroSD card. The I/O pins have been broken out from the ESP32-WROVER-B for easy extension. The board carries an advanced multi-protocol USB bridge (the FTDI FT2232HL), enabling developers to use JTAG directly to debug the ESP32 module through the USB interface. The development board makes secondary development easy and cost-effective.

4 MB Flash + 8 MB PSRAM
  • I/O
  • JTAG
  • USB
  • Camera
  • UART
  • SPI
  • MicroSD Card
LCD Screen, Buttons, RGB LED ESP32-WROVER-B
Getting Started
ESP32-LCDKit

ESP32-LCD-Kit is an HMI (Human Machine Interface) development board based on ESP32-DevKitC (need to purchase if you didn’t have one). ESP32-LCDKit is integrated with such peripherals as SD-Card, DAC-Audio, and can be connected an external display. The board is mainly used for HMI-related development and evaluation.Development board reserved screen interface type: SPI serial interface, 8-bit parallel interface, 16-bit parallel interface.

None
  • I/O
  • USB
LCD, Speaker ESP32-DevKitC
Getting Started
ESP32-Ethernet-Kit

ESP32-Ethernet-Kit is an ESP32-based development board produced by Espressif.

It consists of two development boards, the Ethernet board A and the PoE board B, The Ethernet board contains Bluetooth / Wi-Fi dual-mode ESP32-WROVER-B module and IP101GRI, a Single Port 10/100 Fast Ethernet Transceiver (PHY). The PoE board (B)  provides power over Ethernet functionality. The A board can work independently, without the board B installed.

Key Features

10/100 Fast Ethernet with RJ45 interface

PoE power

Wi-Fi 802.11b/g/n

 JTAG debug

4 MB Flash+ 8 MB PSRAM
  • RMII
N/A ESP32-WROVER-B
Getting Started

2.4 GHz Wi-Fi Development Boards

Features

  • PC connectivity: USB
  • SDK: ESP8266 SDK source code and example applications
Boards Description Flash / PSRAM Interfaces UI Related Products Getting Started
ESP-Launcher

ESP-Launcher is a Micro USB-powered development board that allows access to all 32 pins of ESP8266. It integrates the commonly-used peripherals.

4 MB SPI Flash+4 MB HSPI Flash

  • I/O
  • USB
Buttons, LEDs ESP8266EX
Getting Started
ESP8266-DevKitC

ESP8266-DevKitC is an Espressif compact development board based on ESP8266 modules. All of the I/O pins of the module are broken out to the female header connectors on both sides of the board for easy interfacing. Developers can connect these pins to peripherals as needed. 

2 MB Flash
  • HSPI
  • PWM
  • IR
  • I/O
  • ADC
  • UART
  • I2S
  • I2C
  • USB
Buttons ESP-WROOM-02D
ESP-WROOM-02U
Getting Started

2.4 GHz Wi-Fi + BT/BLE + Sensor Development Boards

Features

  • PC connectivity: USB
  • SDK: ESP-IOT-SOLUTION source code and example applications
Boards Description Flash / PSRAM Interfaces UI Related Products Getting Started
ESP32-Sense Kit

The ESP32 touch sensor development kit, ESP32-Sense Kit, is used for evaluating and developing ESP32 touch sensor system. ESP32-Sense Kit consists of one motherboard and multiple daughterboards. The motherboard contains a display unit, a main control unit and a debug unit. The daughterboards have touch electrodes in different combinations or shapes, such as linear slider, wheel slider, matrix buttons and spring buttons, depending on the application scenarios.

4 MB Flash
  • I/O
  • USB
  • ESP-Prog
Touch sensors, LEDs, RGB, 7-segment, displays ESP32-WROOM-32D
ESP32-WROOM-32
ESP-Prog
Getting started
ESP-Prog

ESP-Prog is one of Espressif’s development and debugging tools, with functions including automatic firmware downloading, serial communication, and JTAG online debugging. ESP-Prog's automatic firmware downloading and serial communication functions are supported on both the ESP8266 and ESP32 platforms, while the JTAG online debugging is supported only on the ESP32 platform. ESP-Prog uses FT2232HL as its USB Bridge Controller chip.

None
  • I/O
  • USB
  • Header connecters
LED, Keys ESP32-Sense Kit
ESP32-MeshKit-Sense
Getting started
ESP32-MeshKit-Sense

ESP32-MeshKit-Sense is a development board with an ESP32 module at its core. It features peripherals, such as a temperature and humidity sensor, an ambient light sensor, etc. The board can be interfaced with screens. The board is mainly used to detect the current consumption of ESP32 modules in a normal operation state or in sleep mode, when connected to different peripherals. 

4 MB Flash
  • I/O
  • USB
  • LCD
  • ESP-Prog
LEDs, Buttons ESP32-WROOM-32D
ESP32-WROOM-32
ESP-Prog
ESP32-MeshKit-Light
Getting started